Speedtech B Body Rear Trailing Arm Uživatelský manuál

1 | P a g e February 3, 2014 ’94-96 Impala SS Rear Trailing Arm Kit The following instructions are intended for professional installers and are g

2 | P a g e B Body Rear Trailing Arm Hardware Kit Checklist Installation Instructions (1) Articulink Upper Trailing Arm (2) Articulink Lower Tr

3 | P a g e The vehicle should be on a level surface before you start. 1. In a couple short hours you can update your Impala with new Speedtech P

4 | P a g e 5. You will need to drill out the trailing arm bracket holes to 9/16” here at the body for the upper arm. Do Not drill out upper axle m

5 | P a g e 5. Remove the factory lower trailing arms. Drill out the lower trailing arm mount bolt hole on the frame and the lower mount bolt hol

6 | P a g e Sway Bar Installation 1. Use the sway bar hardware to attach bar to the rear axle. Do not fully tighten at this time. See sway bar ins

7 | P a g e 7. Double check to be sure all bolts are tight. Speedtech Performance USA LLC 435-628-4300 www.speedtechperformance.com

8 | P a g e Terms and Conditions of Sale 1. Effective January, 2008, supersedes all previous policy statements. Policies are subject to change wit